RU Request a proposal
Sintered stone catalog 2026

ETRUSCO, GEMMA, MATERIA

46 designs in three collections: Italian classics, gemstones and architectural textures. Main format 1600×3200 mm, thicknesses 6, 9 and 12 mm; selected designs in 3 and 20 mm.

Interior with an ETRUSCO sintered stone slab
01 · Italian classics

ETRUSCO

The classics of Italian quarries: white Carrara marbles, Lazio travertines, black Portoro and green Verde Alpi. Patterns proven over centuries — in a 1600×3200 mm slab for walls, floors and countertops.

  • MaterialsMarble · travertine · limestone
  • Designs18
  • Main format1600×3200 mm
About the material

Properties of sintered stone

Common to all three collections: a dense mineral slab without resins that can be cut into countertops, steps and furniture fronts.

< 0,05 %

Water absorption

The surface does not absorb moisture and needs no sealing.

> 1000 °C

Fired without resins

The slab contains only minerals — no resins or polymer binders.

7 on the Mohs scale

Hardness

Harder than marble, scratch resistance on a par with granite.

UV

Stable colour

Does not fade or yellow in the sun: terraces and facades.

Heat resistant

A kitchen without trivets

Hot cookware can be placed directly on the countertop.

3200 × 1600

Floor-to-ceiling slab

Large surfaces with a minimum of joints.

These figures are typical for sintered stone; the properties of a specific batch are confirmed by the manufacturer's test reports in the technical data sheet.

Formats

Floor-to-ceiling slab

The main catalog format is 1600×3200 mm. Other formats are available for selected designs; available formats and thicknesses are listed on each design page.

1600×32001500×30001200×27001200×2400900×18001.75 m
Slab formats
Format, mmAreaStatusDesigns
1600×32005.12 m²Main catalog formatAll collections
1200×27003.24 m²StandardSelected designs, mostly made to order
1200×24002.88 m²StandardSelected designs, made to order
900×18001.62 m²StandardSelected designs, made to order
1200×3600 · 1500×30004.32 · 4.5 m²MATERIA metalsFerro, Rame — from 3 mm on request
900×2600 · 900×2700 · 1200×2600 · 1200×2780—SpecialFor selected designs — see the design page
Thickness and weight

6, 9, 12 or 20 mm — which to choose

Thickness determines weight, installation method, support and logistics cost. Select an option to see guidelines.

≈ 30
kg / m²
≈ 150
kg per 1600×3200 slab

Where to use 12 mm

  • Countertops and kitchen islands
  • Floors, including public areas
  • Steps
  • Facades

Weight is approximate for a 1600×3200 mm slab (5.12 m²) at a density of about 2.45 g/cm³. Metal designs of MATERIA are available from 3 mm on request. These are general recommendations — the thickness is decided by the designer, taking into account the substrate and loads.

Surfaces and layout

Gloss, texture and pattern

One design may be produced in several surfaces. For large walls the layout matters: faces and book-match eliminate pattern repeats.

  • Polished

    Mirror gloss and maximum depth of pattern. Walls, countertops, feature surfaces.

  • Velvet

    Soft silky sheen without glare, pleasant to the touch. Furniture, walls, countertops.

  • Matt

    The natural texture of stone without gloss. Floors, kitchens, bathrooms and calm interiors.

  • Faces 1–4

    Several pattern variations within one design — a surface without visible repeats over large areas.

  • Book-match

    Mirrored layout of adjacent slabs: the veins form a symmetrical panel.

Faces — the pattern continues from slab to slab
Book-match — a mirrored pair
Technical data sheets

What you get for each product

The data sheet is compiled for a specific product and batch, not for the collection as a whole. Its figures are confirmed by the manufacturer's test reports for the relevant product.

Contents of the technical data sheet
SectionContents
GeometryActual thickness, length, width, straightness, flatness and tolerances.
MechanicsFlexural strength and breaking load by the applicable method.
SurfaceWear resistance, stain and chemical resistance, pattern stability.
Wet areasSlip resistance with the test method and conditions.
Exterior useWater absorption, thermal effects, frost resistance.
ProcessingTools, support, radii, cut-outs, edges and factory limitations.
Fire performanceData for a specific assembly: mesh, backing, adhesive, fixings.
TraceabilityBatch code and link to the approved surface reference.
Project request

Need material for a specific project?

Send us plans or visualisations — we will select designs from the collections and calculate the number of slabs including cutting.